Skip To Content
Photo 1
Photo 2
Photo 3
Photo 4


Network Cabling Specialist


To install and maintain communication distribution systems and/or other signals.  These systems comprise the physical architecture that supports voice, video, and data transmission within industrial, commercial and institutional complexes.

Responsibilities and Duties:

  • Interpret and verify work orders, specifications, drawings, schematics and special requirements
  • Perform site inspections
  • Assemble and set up all tools, materials and equipment
  • Create cable pathways
  • Install cable supports
  • Install, fish, dress, cross connect and terminate Unshielded Twisted Pair (UTP), co-axial and fibre optic cable
  • Install WiFi (802.11b/g and n) networks
  • Test, review and troubleshoot installed systems
  • Liaise with customers, store managers, and employees to explain, coordinate and schedule network cable installations.
  • Provide work log and reports 

Occupational Requirements:

Technical Requirements: 

  • Familiarity with retail environment and POS systems an asset
  • Familiarity with network equipment (routers, switches, desktops, printers, etc…) an asset
  • Must possess a valid and unexpired Class G driver’s licence, and the ability to produce a clean driver’s abstract upon hire and periodically throughout employment
  • Must have knowledge of basic computer skills and be able to demonstrate good writing skills.
  • Knowledge of Microsoft Office, Excel, and Outlook very helpful.
  • Experience with scissor lifts (will train/certify as required)

Personal Requirements: 

  • Ability to travel to customers’ sites on short notice over extended periods of time (possibly across Canada)
  • Must have own vehicle and be able to drive to and from jobs independently
  • Ability to work revolving day/night shift

Working Conditions

  • Physical load: high, up to 50lbs
  • Location: customer sites, warehouse, working at heights
  • Hazard: high, PPE required, fall protection, use of power tools and other equipment

Safety Requirements:

Personal Protective Equipment

All Personal Protective Equipment with the exception of CSA Approved Footwear is provided by BFG:

  • CSA Approved Footwear
  • Hard Hat
  • High Visibility Safety Vest
  • Long Pants
  • Fall Protection Harness
  • Fall Protection Lanyard
  • Safety Glasses
  • High Dexterity Gloves
  • Milwaukee Safety Knife


All of the required job specific safety training will be provided by BFG:

  • WHMIS 2015 
  • Ministry of Labour 4 Step H&S Awareness 
  • Fall Protection / Working at Heights (Ontario) *
  • Elevated Work Platform (Scissor/Boom Lift) *

Employees must meet all of the above training requirements prior to being deployed or assigned projects.

* Training is valid for 3 years from the training date.  Employees that hold valid certifications prior to employment with BFG may be exempt from attending this pre-employment training. 

Tools & Equipment Requirements:


The following tools and equipment are required to be purchased and supplied by the employee:

  • Side Cutters
  • Small Screw Driver Set
  • Level
  • Flashlight
  • Dry Wall Saw
  • Line Toner / Probe Kit
  • Cordless Drill & Drills Bits
  • Needle Nose Pliers
  • 110 Punch Down Tool
  • BIX Punch Down Tool
  • 25 ft Measuring Tape
  • Channel Locks
  • Wrench Set (Metric & Imperial, up to 3/4 inch)
  • Fish Tape (75ft x 1/4 inch)

Company Supplied Tools & Equipment

The below tools and equipment will be supplied by BFG:

  • 4 Pair Tester or Fluke Meter


"*" indicates required fields

Drop files here or
Max. file size: 50 MB.
    This field is for validation purposes and should be left unchanged.

    What our staff say

    I started my second career with BFG after my kids were full grown and independent.

    They have seen my potential and encouraged me to develop it by trusting me with increasing responsibility and letting me take on and own tasks and manage a team.

    BFG has provided me with growth and advancement and offers you a friendly work environment with supportive and approachable management. I am proud to be working for a highly successful Canadian company which provides a diverse and inclusive culture with awesome team members!

    Nicole Filipcic

    End User Services Coordinator

    BFG Enterprise Services

    I joined BFG as a second level technician in 2014. Throughout my tenure with BFG, I have been provided opportunities to grow and take on new roles including becoming a technical lead and shortly after promoted to Group Field Leader which has allowed me to take on additional responsibilities and further develop my management skills.

    I now lead a diverse team operating within a collaborative and friendly environment. The team works hard every day towards a common goal: ensuring that operations run smoothly.

    Mansour Hafshijani

    Field Group Leader EUS Services

    BFG Enterprise Services

    I would start by thank you for giving me the opportunity to work in such a great company my journey started on the 2 of February 2015 with BFG and since then I’m living a dream with a great management always backing the employees and listening to their needs.

    They gave me the opportunity to advance in my career and putting effort to help me fulfil my duties.

    I can just be thankful and I look forward to continue on this successful path.

    Redouane Mramer

    Field Group Lead Distribution Services

    BFG Enterprise Services

    BFG Enterprise Services. Proudly Canadian.

    © 2022 BFG Enterprise Services.
    All Rights Reserved.

    Web Design by NVISION